Canon Océ VarioStream 7000 Manual
7.3.4.8 Complete corotron replacement
290
A29246-X20-X-4-7680 / fa703.fm
7.3.4.8 Complete corotron replacement
Proceed as follows:
1.
Corotron locks are checked.
If this step cannot be completed, re-open and close the locking mechanism of the
corotron mountings.
If this step cannot be completed, re-open and close the locking mechanism of the
corotron mountings.
2.
Close both front doors and the cover of the printing system.
3.
Click the following button to lower corotrons:
4.
Enter on the operator panel whether a new corotron was fitted:
•
The message on the operator panel is deleted automatically, the replacement of
the corotrons is recorded in the m enu and the consumable
counter is reset.
the corotrons is recorded in the
counter is reset.
•
The consumable counter is not reset.
5.
Click the following button on the operator panel to complete corotron replacement:
All printing system assemblies are checked (duration approx. 2-3 minutes) before
the printing system is switched to the "Ready" status.
the printing system is switched to the "Ready" status.
In both cases, the message on the operator panel is automatically deleted, the
replacement of the corotrons is recorded in the menu and
the consumable counter is reset.
replacement of the corotrons is recorded in the
the consumable counter is reset.