Canon Océ VarioStream 7000 Manual

A29246-X20-X-4-7680 / fa301.fm

53

3

switches on the tension rollers in the stacker top. Pressing the key 
again deactivates them. 
After a period of 10 seconds, the tension rollers are automatically 
powered down (not while paper is being inserted).
This key has no function during the preparation phase of the printing 
system.

Requirement:
• This function can only be executed in "Stop" status.

4

completely lowers the stacker tray slide and deactivates it. This is 
necessary when stacking very short forms.
The indicator light above lights up.
Pressing the key again - and every new paper insertion - reactivates 
the stacker tray slide, which improves stacker behavior even for large 
stack heights. The associated indicator lamp goes out. 

5
6

Raises and/or lowers the stacker top.
Pressing the key again before the end position is reached stops the 
movement. 

7

C-EJECT

Pressing this key will carry out an EJECT operation for twin and/or 
triplex operation.

8

STOP

switches the printing system to the "Stop" status
or
cancels current function
The orange indicator light above the key lights up and the green 
READY indicator light goes out. "Not ready" is displayed in the basic 
menu.
Before the printing system stops, the pages prepared on the PC drum 
are transferred to the paper. The paper stops at the start of a page.
Characters on the paper between paper transporter and fuser station 
are not yet fused.
The printing system is made operational again by pressing the 
READY key.