Canon Océ VarioPrint 6000+ Series Manual

If you want to create space for staples or punch holes, for example, you can use the [Align]
function. However, when the [Align] function is not precise enough, you can use the [Margin
shift] and [Image shift] functions. These functions allow you to shift the image more precisely.
The preview in the right-hand pane of the operator panel displays the consequences of your
changes. If you shift the margin too much, you may loose part of the image.

The [Shift] function has 2 options.
• [Margin shift] allows you to increase or decrease the margin to create more binding space, for

example. With [Margin shift], you can shift an image relative to the binding edge.

• [Image shift] has basically the same function. However, [Image shift] also allows you to move

the image vertically. This gives you more freedom in moving the image exactly to the desired
position.

NOTE

By default, the values of the front side and the back side are linked. To define different values for

each side, touch  . The changes you make are valid for the whole document, not only for the

current page.

1.

Touch [Jobs] -> [Waiting jobs].

2.

Touch the job you want to change.

NOTE

You can only change the settings of the active print job   after you stopped the printer (press the
[Stop] button   two times).

3.

Touch [Properties], or touch the job twice to open the [Properties] window.

4.

Touch the [Shift] button.

5.

Make the required changes.

6.

Press [OK].

7.

Press [OK].