Canon Océ VarioPrint 6000+ Series Manual
Punch the output
Introduction
If your machine is equipped with a puncher, you can punch holes in your documents. On the
operator panel you can indicate:
• The number of holes punched
operator panel you can indicate:
• The number of holes punched
Puncher
The number of holes you can punch depends on the die set of the puncher.
NOTE
You can punch A4/Letter media.
Punch orientation
The punch orientation depends on how you place the media in the paper trays. The table below
gives an overview of the possible combinations and the resulting punch orientation.
gives an overview of the possible combinations and the resulting punch orientation.
Deposit header-up or left
Deposit header-up / left (Paper Logic)
Orientation
Feed edge
Punch example
Portrait
Long-edge feed
Landscape
Long-edge feed
Deposit header-down or right
Deposit header-down / right (not Paper Logic)
Orientation
Feed edge
Punch example
Portrait
Long-edge feed
Landscape
Long-edge feed
Procedure
1.
On the operator panel, press the [Jobs] button.
2.
In the list of [Waiting jobs] or [Scheduled jobs], touch the job you want to edit.
Punch the output
128
Chapter 7 - Carry out print jobs