Canon Océ VarioPrint 6000+ Series Manual
Group of settings
Available settings
Short description
[Logging]
• [Save the data-
dump file]
• [Save the trace file]
• [Print the configura-
• [Print the configura-
tion report]
When an error occurs, the help desk of your
printer supplier can ask you to create and send
a trace file and a datadump file. The datadump
file is a .zip file that contains detailed technical
information about your system. Furthermore,
the system can store trace log files in .zip files.
You can save both .zip files to a USB drive.
The configuration report contains information
about the configuration of your printing sys-
tem, for example information about the sys-
tem configuration, controller configuration and
network settings. You can print the configura-
tion report for backup purposes, for example.
Follow the instructions on the operator panel
when you save a file or print a report.
printer supplier can ask you to create and send
a trace file and a datadump file. The datadump
file is a .zip file that contains detailed technical
information about your system. Furthermore,
the system can store trace log files in .zip files.
You can save both .zip files to a USB drive.
The configuration report contains information
about the configuration of your printing sys-
tem, for example information about the sys-
tem configuration, controller configuration and
network settings. You can print the configura-
tion report for backup purposes, for example.
Follow the instructions on the operator panel
when you save a file or print a report.
[Connectivity]
• [MAC address]
(read-only)
• [Host name]
• [Link speed and
• [Link speed and
connection type]
• IPv4 settings
• IPv6 settings
• DNS settings
• WINS settings
• [Test the TCP/IP
• IPv6 settings
• DNS settings
• WINS settings
• [Test the TCP/IP
connection]
The [Connectivity] section contains the main
settings to integrate the printer into a network.
After you have adapted the network settings,
you can test the connection from here.
Follow the instructions on the operator panel
when you adapt the network settings.
settings to integrate the printer into a network.
After you have adapted the network settings,
you can test the connection from here.
Follow the instructions on the operator panel
when you adapt the network settings.
[Remote connection]
(optional)
(optional)
• [Remote connection
status] (read-only)
• [Remote connection
enabled]
• [Remote Service
country code]
• [Test Remote con-
nection]
The [Remote connection] section (optional)
contains the settings to enable the remote con-
nection and to configure the Remote Service.
See also
contains the settings to enable the remote con-
nection and to configure the Remote Service.
See also
NOTE
Only Service can adapt the remote
connection settings. After Service
adapts the remote connection set-
tings, you can test the remote con-
nection with this setting.
connection settings. After Service
adapts the remote connection set-
tings, you can test the remote con-
nection with this setting.
4
Change a number of settings in the Settings Editor via the operator panel
34
Chapter 5 - Adapt printer settings to your needs