Canon Océ VarioPrint 6000+ Series Manual
Operator Manual
Page 48
4.6.2 In "WITH COVER" mode:
4.6.2.1 Cover positioning modes:
There are three different ways in which the cover can be cased in:
•
n/1 mode: Default mode.
The edge of the front cover is positioned at the edge of the first page to
be glued.
When the paper is loaded into the carriage jaws, the operator must
place the back of the last page of the book facing him.
-> Books with cover wings only available in this mode.
N
1
N
1
Rear
Paper path
•
CENTRE mode: The cover is positioned symmetrically over the spine of the book.
When the paper is loaded into the carriage jaws, the operator
must place the back of the last page of the book facing him.
Symetric
Paper path
•
1/n mode: The edge of the front cover is positioned at the edge of the first page to
be glued.
When the paper is loaded into the carriage jaws, the operator must
place the front of the first page of the book facing him.
1 N
1
N
Front
Paper path
The options for creasing and the cover parameters to be entered vary according to
the selected mode.
Paper path
Paper path
Paper path