Canon Océ VarioPrint 6000+ Series Manual
Step
Action
Information
2
Open the trim stop guard.
Loosen the 2 orange plastic hand
screws to release the locking plates.
The locking plates can rotate to re-
lease the trim stop guard.
Pull the trim stop guard towards you.
screws to release the locking plates.
The locking plates can rotate to re-
lease the trim stop guard.
Pull the trim stop guard towards you.
3
Check the trim stop and remove any
pieces of trimmed paper.
pieces of trimmed paper.
4
Close the trim stop guard.
Push the trim stop guard into posi-
tion.
Hold the locking plates in position
and tighten the orange hand screws.
tion.
Hold the locking plates in position
and tighten the orange hand screws.
5
Attach the trim bin.
Clear paper from the trim stop
130
Chapter 7 - Maintenance