Canon Océ VarioPrint 6000+ Series Manual

The 

ADVANCED   window gives you access to special machine functions.

Button overview

If the machine calibration appears incorrect or if an 'axis moving'
error message remains on the screen, touch 

RE-REF to re-refer-

ence the adjustment axes. The adjustment axes return to the cur-
rent settings. At intervals, the machine will re-reference the axes
during the set-up procedure.

Touch 

STITCHER UP before you lubricate the stitch head. This ac-

tion moves the stitch head to the correct position for lubrication.

If the print job has been canceled, a set or part of a set can remain
in the gathering area. Touch 

START  , then touch PURGE SET to

clear the set from the machine. The book is not stitched or trim-
med
According to the type of error that occurred, there can be a pause
of 7 seconds before the 

PURGE SET button will operate.

For safety reasons, this function is disabled when the gathering
area cover is open.

If there is a set in the gathering area, you can make the set into a
book.

NOTE

Do not use this option if 

SET THICKNESS is set to AUTO.

Touch 

START   then touch MAKE BOOK to clear the set from the

machine. The book is not stitched or trimmed.
According to the type of error that occurred, there can be a pause
of 7 seconds before the 

MAKE BOOK button will operate.

For safety reasons, this function is disabled when the gathering
area cover is open.