Canon Océ ColorStream 3000 Manual
Removing the paper web
Attention:
To be able to remove the paper web, the printing system must be in the 'Stop' status.
To remove the paper web
#
Proceed as follows:
If the printing system is not yet in the 'Stop' status:
Press the 'Stop' button.
Press the 'Stop' button.
1.
If required:
Switch the paper post-processing unit to 'Stop'.
Switch the paper post-processing unit to 'Stop'.
2.
Press the 'NPRO' button.
The paper is moved forwards by around 3.5m.
The paper is moved forwards by around 3.5m.
3.
Separate the paper at right angles to the transport device around 1m before
the paper input.
the paper input.
4.
Press the 'NPRO' button.
The paper is moved in the paper path direction. After a brief stop, the paper is
moved forward until it exits the printing system.
The paper is moved in the paper path direction. After a brief stop, the paper is
moved forward until it exits the printing system.
5.
Chapter 6 - Operating the Printing System
155
Removing the paper web