Canon Océ ColorStream 3000 Manual
Putting the Developer Station on the Stacking Tray
Caution:
■
Heavy weight
Note the heavy weight of the developer station (approx. 70 kg/145.35 lb) and the
correct functioning of the locks on the replacement cart.
Note the heavy weight of the developer station (approx. 70 kg/145.35 lb) and the
correct functioning of the locks on the replacement cart.
■
Danger of tilting
Lower the developer station to the lowest position of the hoisting lift before transporting
it, otherwise there is an increased danger of tilting on uneven floors.
Lower the developer station to the lowest position of the hoisting lift before transporting
it, otherwise there is an increased danger of tilting on uneven floors.
■
Danger of crushing
There is a danger of injury due to crushing when lowering or raising the hoisting lift.
Keep hands, feet and objects out of the hoisting area.
There is a danger of injury due to crushing when lowering or raising the hoisting lift.
Keep hands, feet and objects out of the hoisting area.
■
Hot surfaces
After a longer period of printing, the motor of the developer station may be hot. Do
not touch the motor.
After a longer period of printing, the motor of the developer station may be hot. Do
not touch the motor.
Attention:
Avoid damage
Bear in mind the width and height of the replacement cart when moving it.
Bear in mind the width and height of the replacement cart when moving it.
To Put the Developer Station on a Stacking Tray
#
Proceed as follows:
Carefully lower the developer
station onto the stacking tray.
station onto the stacking tray.
1.
Chapter 6 - Operating the Printing System
181
Putting the Developer Station on the Stacking Tray