Canon Océ ColorStream 3000 Manual
Analyzing Test Pages for Color Calibration
To Analyze Test Pages for Color Calibration
#
Proceed as follows:
If you have not yet selected the 'Evaluate' menu, choose the following on the
operator panel:
'Configuration' -> 'Color' -> 'Calibrate color' -> 'Evaluate' menu
Click the 'Next' button.
The system checks for scanned data in the "transfer area" of the printing system.
operator panel:
'Configuration' -> 'Color' -> 'Calibrate color' -> 'Evaluate' menu
Click the 'Next' button.
The system checks for scanned data in the "transfer area" of the printing system.
1.
Click the 'Import scan data' but-
ton and select the source from
which the scan data is to be im-
ported if the scan data has been
manually recorded.
ton and select the source from
which the scan data is to be im-
ported if the scan data has been
manually recorded.
■
USB memory stick
Insert the USB memory stick
with the data into the USB
port. The USB port is located
below the operator panel near
the paper input (see image).
Insert the USB memory stick
with the data into the USB
port. The USB port is located
below the operator panel near
the paper input (see image).
■
Transfer area (a directory on
the drive of the controller
hard disk)
the drive of the controller
hard disk)
If the scan data was entered auto-
matically:
Click the 'Start' button.
matically:
Click the 'Start' button.
2.
Chapter 6 - Operating the Printing System
253
Analyzing Test Pages for Color Calibration