Canon Océ ColorStream 3000 Manual

Page of 524
Replace waste toner box
Introduction
The used developer is also sucked into the waste toner box via a vacuum system. When
the waste toner box has reached its maximum filling level, a warning appears on the op-
erator panel. Depending on the print image, you still have approx. 30 minutes after the
warning is displayed before the printing system stops and displays an error message.
Caution:
Do not allow toner to come into contact with the eyes. In the event of contact with
the eyes, rinse eyes with plenty of cold water and seek medical attention.
Avoid contact with the skin. In the event of contact with the skin, wash toner off with
plenty of cold water.
Do not inhale toner. Avoid accumulation of dust. If, after inhaling toner, you experi-
ence symptoms such as nausea, headaches or dizziness, go out into the fresh air imme-
diately.
Do not spill toner. You can slip on spilled toner. Clean up spilled toner or developer
immediately using a damp cloth or vacuum cleaner. Do not use warm water as it
makes the toner soft and sticky.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger toner quantities, the industrial vacuum cleaner
must be explosion proof.
Keep toner out of the reach of children and store it away from containers used for
food and drink.
Attention:
The waste toner box can only be replaced when printing is stopped.
Do not re-use toner.
Keep used toner ready for collection by Service or the contracted shipping company.
To Replace the Waste Toner Box
#
Proceed as follows:
If the printing system has not yet stopped, click the 'Ready' button.
1.
Chapter 8 - Replacing Consumables
331
Replace waste toner box