Canon Océ ColorStream 3000 Manual
Removing Transfer Belt in the Upper Print Unit
Attention:
section.
To Remove a Transfer Belt in the Upper Print Unit
#
Proceed as follows:
Prepare the original packaging of the soft transfer belt and place it next to the
printing system.
printing system.
1.
Caution
The inner sliding surfaces of the slide foils must be clean. Dirt on the sliding
surfaces can damage the soft transfer belt.
Wear the gloves provided in the packaging.
The inner sliding surfaces of the slide foils must be clean. Dirt on the sliding
surfaces can damage the soft transfer belt.
Wear the gloves provided in the packaging.
Carefully insert the sliding foil
snugly between the transfer belt
and cover.
snugly between the transfer belt
and cover.
2.
Push the sliding foil around the
roller in the direction of the ar-
row.
roller in the direction of the ar-
row.
3.
Chapter 9 - Replacing Expendables
380
Removing Transfer Belt in the Upper Print Unit