Canon Océ ColorStream 3000 Manual
Installing smoothing rollers
Caution:
Observe the safety directives in the
section.
Attention:
Observe the smoothing roller combination
It is recommended that you install the hard smoothing roller (gray surface, order number
S29312-F1430) in the upper print unit and the soft smoothing roller (red surface, order
number S29312-F1431) in the lower print unit.
It is recommended that you install the hard smoothing roller (gray surface, order number
S29312-F1430) in the upper print unit and the soft smoothing roller (red surface, order
number S29312-F1431) in the lower print unit.
To install the smoothing rollers
#
Proceed as follows:
If the lower smoothing roller is to be replaced: continue with step 2.
If only the upper smoothing roller is to be replaced: continue with step 7.
If only the upper smoothing roller is to be replaced: continue with step 7.
1.
Caution
Do not damage the smoothing roller
Ensure that you do not damage the smoothing rollers on the edges of the
blower unit.
Do not damage the smoothing roller
Ensure that you do not damage the smoothing rollers on the edges of the
blower unit.
Chapter 9 - Replacing Expendables
461
Installing smoothing rollers