Tripp Lite 42U SmartRack Deep and Wide Rack Enclosure Cabinet with doors & side panels SR42UBDPWD User Manual

 

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

Model #: SR42UBDPWD

 

42U SmartRack enclosure with doors and side panels

4 interior vertical posts with unthreaded square hole openings

47.25" (1200mm) depth for extra space need for mounting deep equipment

29.5" (750mm) width for optimizing airflow through cabinet

Ships fully assembled

Massive front to rear ventilation capacity

3000 lb stationary / 2250 lb rolling load capacity

Locking, removable, reversible front and rear doors

Locking, removable side panels keyed alike with doors

Pre-installed casters and leveling feet

Rolls through standard 7 foot doorway

Includes 50 pieces of M6 cage nuts and 50 pieces of M6 screws (equipment

mounting hardware)

 

A DEEP and WIDE version of our standard 42U SmartRack. This enclosure is 1200mm deep (47.25") compared to the standard 1070mm deep

(42"). This extra depth allows for high density equipment installations. It allows extra space for moving the cable management back as well as

providing space for mounted equipment that has hot-swap, removable power supplies out the back of the enclosure. It is also 750mm wide (29.5")

compared to the standard 600mm wide (23.6"). This extra width allows for high density equipment installations. It allows cable management and

PDU mounting off to the sides of the rack in order to keep these items out of the airflow for proper cooling. All features from the standard SmartRacks

carry over to these wide racks to allow cross usage of accessories. 

Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters.

Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index

ensures consistent rail placement without requiring time-consuming measurements.

Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable

managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can

accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).

Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws

Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.

Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.

Maximum usable internal depth of 42 inches/1070mm (front to rear rail).

Weight ratings of 3000 lb stationary and 2250 lb rolling.

Front door is locking, reversible and removable.

Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be

placed closer to a wall.

Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side