Canon Direct Print and Scan for Mobile Manual
Direct Print & Scan for Mobile V2.0 Installation and User’s Guide
39
3.2.4 Configuring the Security Settings
Follow the procedure below to configure the security and tracking settings for the
MEAP application.
IMPORTANT
• If Security and Tracking are enabled, the mobile device must scan the barcode in
• If Security and Tracking are enabled, the mobile device must scan the barcode in
the DPSM application on the MEAP device, or you must enter the security code to
print and release a job.
print and release a job.
• SSL must be enabled to activate the Security Options. To enable SSL, see
on p. 32, and select ‘On’ instead of ‘Off’ for
<Use SSL>.
1. Click the [Security] tab.
The Security Configuration screen is displayed.
2. Select the [Enable Security and Tracking] check box to secure and track DPSM
transactions on the MEAP device.