Canon EOS Rebel T6 EF-S 18-55mm IS II Kit Manual
68
This is a connection mode available when using an access point
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
compatible with WPS. In PIN code connection mode (PIN mode), an 8-
digit identification number specified on the camera is set at the access
point to establish a connection.
Even if there are multiple access points active in the surrounding
area, a relatively reliable connection can be established using this
shared identification number.
area, a relatively reliable connection can be established using this
shared identification number.
It may take approx. one minute to establish a connection.
1
Select [Wi-Fi function].
Under the [53] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
to [Enable], then select [Wi-Fi
function].
2
Select [m].
Select [m] (Upload to Web service)
and press <0>.
and press <0>.
3
Select a Web service.
Select a Web service to connect to,
then press <0>.
then press <0>.
The contents and ordering of the list
of items displayed will vary depending
on settings.
of items displayed will vary depending
on settings.
The Web service to connect to can be
changed when reconnecting (p.80).
changed when reconnecting (p.80).
The camera’s <k> lamp will blink.
Depending on the selected Web
service, the [Send to] screen is
displayed. Select a destination (p.75).
service, the [Send to] screen is
displayed. Select a destination (p.75).
Connecting via WPS (PIN Mode)