Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit Manual
109
Preparation
The general procedure for sending images to a Web service is as
follows.
follows.
1
Prepare a computer on which EOS Utility has been
installed.
installed.
Use the EOS software CD-ROM to install EOS Utility.
2
Access Canon Web site from the computer and sign up
as a CANON iMAGE GATEWAY member (free of charge).
as a CANON iMAGE GATEWAY member (free of charge).
If you are already a member, proceed to step 3.
3
Connect the camera and computer with an interface
cable.
cable.
Before connection, set [51: Wi-Fi/NFC] to [Disable].
4
Start EOS Utility on the computer, log in to CANON
iMAGE GATEWAY, then configure the camera’s settings
to enable access to Web services.
iMAGE GATEWAY, then configure the camera’s settings
to enable access to Web services.
For details, refer to the EOS Utility Instruction Manual (CD-ROM).
5
Connect the camera to a Wi-Fi access point (p.110).
Disconnect the interface cable in advance.
6
Send images to a Web service registered on the camera
(p.121).
(p.121).
You can share images with your family and friends by sending
images from the camera to a Web service registered on the camera
or by sending links to the online albums.
images from the camera to a Web service registered on the camera
or by sending links to the online albums.
For information on countries and areas supporting CANON iMAGE
GATEWAY services, refer to the Canon Web site (http://www.canon.com/
cig).
GATEWAY services, refer to the Canon Web site (http://www.canon.com/
cig).
For Web services that can be used with this camera’s wireless LAN
functions, refer to the CANON iMAGE GATEWAY site.
functions, refer to the CANON iMAGE GATEWAY site.