Canon CINE-SERVO 50-1000mm T5.0-8.9 PL Manual
E81
4. Operation in Full Mode
1
MENU
Menu screen
See “4.2 Confi guration from the Menu Screen.”
9
A 1
AUX1 switch
By default, the AUX1 switch for a zoom
demand is assigned to the {Shuttle} function,
but it can be reassigned as needed.
demand is assigned to the {Shuttle} function,
but it can be reassigned as needed.
See “4.1.10 Assigning Functions to the AUX1
Switch.”
Switch.”
2
[ ]
User
Adjust settings for up to ten users (0–9), to
distinguish settings by user. Switch users from
this screen, either to use or change the settings.
distinguish settings by user. Switch users from
this screen, either to use or change the settings.
See “4.1.3 Switching Users.”
10
V
VTR switch
By default, the VTR switch for a drive unit is
assigned to the {VTR} function, but it can be
reassigned as needed.
assigned to the {VTR} function, but it can be
reassigned as needed.
See “4.1.11 Assigning Functions to the VTR Switch.”
3
[Basic]
Switching to Basic Mode
Switch to Basic mode as needed.
See “4.1.4 Switching to Basic Mode.”
11
A 2
AUX2 switch
By default, the AUX2 switch for a zoom
demand is assigned to the {Frame Preset 1}
function, but it can be reassigned as needed.
demand is assigned to the {Frame Preset 1}
function, but it can be reassigned as needed.
See “4.1.12 Assigning Functions to the AUX2 Switch.”
4
[Adj]
Mechanical end auto-adjustment
Perform automatic adjustment of the
mechanical end in zoom, focus, and iris
operations on the lens and drive unit.
mechanical end in zoom, focus, and iris
operations on the lens and drive unit.
See “4.1.5 Auto-Adjusting the Mechanical End.”
12
R
RET switch
By default, the RET switch for a drive unit is
assigned to the {Return} function, but it can be
reassigned as needed.
assigned to the {Return} function, but it can be
reassigned as needed.
See “4.1.13 Assigning Functions to the RET Switch.”
5
[I-Gain]
Iris gain
Adjust the auto iris gain or the remote iris gain
value as needed.
value as needed.
See “4.1.6 Specifying Iris Gain.”
13
[Z.M.]
Zoom curve mode
Adjust zoom speed in response to pressing the zoom
seesaw switch or tilting the analog demand thumb ring.
seesaw switch or tilting the analog demand thumb ring.
See “4.1.14 Specifying Zoom Curve Mode.”
6
[Trk]
Zoom tracking
Switch to ON when using zoom tracking.
See “4.1.7 Zoom Tracking ON/OFF.”
14
Seesaw
Enable iris control using the zoom seesaw
switch.
switch.
See “4.1.15 Assigning Functions to the
Seesaw.”
Seesaw.”
7
A
AUX switch
By default, the AUX switch for a drive unit is
assigned to the “Frame Preset 1” function, but
it can be reassigned as needed.
assigned to the “Frame Preset 1” function, but
it can be reassigned as needed.
See “4.1.8 Assigning Functions to the AUX Switch.”
15
AM
Iris A/M switch
Adjust movement of the iris A/M switch on the
drive unit.
drive unit.
See “4.1.16 Specifying Iris A/M Switch.”
8
[I-Tq]
Iris torque
Adjust the level of torque in manual control of
the iris ring as needed.
the iris ring as needed.
See “4.1.9 Specifying Iris Torque.”