Olympus E-5 Instruction Manual
134
EN
12
Shooti
ng tip
s
and m
a
intenance
Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Turn off the camera and remove the battery before cleaning the camera.
Exterior:
• Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and
wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used
the camera at the beach, use a cloth soaked in clean water and well wrung.
the camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor and viewfinder:
• Wipe gently with a soft cloth.
Lens, mirror and focusing screen:
• Blow dust off the lens, mirror and focusing screen with a commercially available blower. For the
lens, wipe gently with a lens cleaning paper.
Storage
• When not using the camera for a prolonged period, remove the battery and card. Store the
• When not using the camera for a prolonged period, remove the battery and card. Store the
camera in a cool, dry place that is well ventilated.
• Insert the battery periodically and test the camera’s functions.
Cleaning and checking the image pickup device
This camera incorporates a dust reduction function to keep dust from getting on the image
pickup device and to remove any dust or dirt from the image pickup device surface with
ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and
when starting and stopping live view. The dust reduction function operates at the same time
as the pixel mapping, which checks the image pickup device and image processing circuitry.
Since dust reduction is activated every time the camera’s power is turned on, the camera
should be held upright for the dust reduction function to be effective.
This camera incorporates a dust reduction function to keep dust from getting on the image
pickup device and to remove any dust or dirt from the image pickup device surface with
ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and
when starting and stopping live view. The dust reduction function operates at the same time
as the pixel mapping, which checks the image pickup device and image processing circuitry.
Since dust reduction is activated every time the camera’s power is turned on, the camera
should be held upright for the dust reduction function to be effective.
No indication
No indication
SETTINGS
CHANGED
CHANGED
The printer’s
paper cassette
has been removed
or the printer has
been manipulated
while making
settings on the
camera.
paper cassette
has been removed
or the printer has
been manipulated
while making
settings on the
camera.
Do not manipulate the
printer while making
settings on the camera.
printer while making
settings on the camera.
No indication
No indication
PRINT ERROR
There is a problem
with the printer
and/or camera.
with the printer
and/or camera.
Turn off camera and
printer. Check the printer
and remedy any problems
before turning the power
on again.
printer. Check the printer
and remedy any problems
before turning the power
on again.
No indication
No indication
CANNOT PRINT
Pictures recorded
on other cameras
may not be printed
on this camera.
on other cameras
may not be printed
on this camera.
Use a personal computer
to print.
to print.
Camera maintenance
Viewfinder
indications
Control
panel
indications
Monitor
indication
Possible cause
Corrective action
s0033_e_00_0_unified.book 134 ページ ２０１０年１１月１６日 火曜日 午後５時２４分