Olympus E-5 Instruction Manual
40
EN
1
U
s
in
g
li
ve
vi
vi
ew
You can check the effect of exposure compensation or white balance on a 4-split screen.
1
Press the INFO button repeatedly to display the
multi view display.
multi view display.
g“Switching the information display” (P. 39)
• The exposure compensation comparison screen is
• The exposure compensation comparison screen is
displayed. Press
a to switch to the white balance
comparison screen. Press
ac to switch the screen.
2
Use
bd or the dial to select the setting value, then
press the
i button.
• You can take the picture using the set value.
x
Notes
• Exposure compensation is not available in M or BULB modes.
• This function cannot be used when the picture mode is set to an art filter.
• When the exposure compensation value exceeds ±3, the effect is not displayed correctly.
• This function cannot be used when the picture mode is set to an art filter.
• When the exposure compensation value exceeds ±3, the effect is not displayed correctly.
It is possible to enlarge the subject for display. Enlarging the image during MF makes focus
confirmation and adjustment easier.
confirmation and adjustment easier.
1
Press the
Fn button/ (preview) button to display the zoom display.
• The enlargement frame will be displayed.
• In this state, press the shutter button halfway, and focus using the enlargement frame
• In this state, press the shutter button halfway, and focus using the enlargement frame
regardless of the AF target setting. (Zoom frame AF)
2
Use
p to move the frame and press the Fn button/ (preview) button.
• The area inside the frame is enlarged and displayed.
• In this state, press the shutter button halfway to focus while zoomed.
• Press and hold the
• In this state, press the shutter button halfway to focus while zoomed.
• Press and hold the
i button to return the enlargement frame to the center after it was
moved.
3
Turn the dial to change the magnification (5×/7×/10×/14×).
• Use
p to scroll the frame even during magnification.
• Press the
i button, or press and hold the
Fn button/ (preview) button to cancel the zoom
display.
To enlarge the image just by rotating the focus ring:
g“MF ASSIST” (P. 103)
To enlarge the image when the
Fn
button/
(preview) button is set to other function:
j Press the
INFO button to display the zoom display, and then press the i button.
g“Switching the information display” (P. 39)
Taking a picture while comparing the effect
Enlarged display operation
TIPS
SET
WB/
F
+0.7
+0.3
+1.0
+0.7
0.0
-0.3
+0.3
0.0
250
250
250 F5.6
F5.6
P
1023
1023
1023
10x
10x
Fn button/
(preview)
button
s0033_e_00_0_unified.book 40 ページ ２０１０年１１月１６日 火曜日 午後５時２４分