Olympus E-5 Instruction Manual

lay
back functi

on
s

Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.

Notes

• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,

both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images.

g“RAW+JPEG

ERASE” (P. 115)

• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored.

g“Protecting images” (P. 97)

Single-frame erase

Display the images you want to erase and press the

button.

Use

ac to select [YES], then press the i button.

Erasing selected frames

This function lets you erase selected images at one time during single-frame playback or
index display.

Display the images you want to erase and press the

i button.

• The selected images will be shown with v.
• To cancel your selection, press the

i button again.

• Press

p to select the images you want to erase and press the i button.

After you have selected the images to erase, press the

D button.

Use

ac to select [YES], then press the i button.

All-frame erase

MENU [W] [CARD SETUP]

Use

ac to select [ALL ERASE], then press the i button.

Use

ac to select [YES], then press the i button.

• All frames will be erased.

To erase immediately:

j If you have set “QUICK ERASE” (gP. 115) to [ON], pressing the

D button will erase an image

immediately.

j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 116)

Erasing images

TIPS

D button

s0033_e_00_0_unified.book 98 ページ２０１０年１１月１６日　火曜日　午後５時２４分