Olympus XZ-10 Instruction Manual
7
EN
Preparations for shooting
1
Turning on the camera and making the initial settings
When you turn on the camera for the first time, a screen appears enabling to set the
language for the menus and messages displayed in the monitor, and the date and time.
language for the menus and messages displayed in the monitor, and the date and time.
#
Cautions
• Turning on the camera raises the flash. Do not place fingers on the flash.
• Selecting [
• Selecting [
$](Flash off) prevents the flash being raised.
g “Using a flash (flash photography)” (P. 22)
1
After turning the camera on with the
ON/OFF button, select a language
using
FGHI and press the
A button.
2
Use
FG to select the year for
[Y].
X
2013
Y
M
D
Time
Cancel
Y / M / D
3
Press
I to save the setting for
[Y].
X
2013
Y
M
D
Time
Cancel
Y / M / D
4
As in Steps 2 and 3, use
FGHIto set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order), and then press the
A
button.
• For precise time setting, press the
A button as the time signal strikes 00 seconds.
5
Use HI to select the [
x]
time zone and then press the
A button.
• Use FG to turn daylight saving time
([Summer]) on or off.
Seoul
Tokyo
Tokyo
Summer
’13.02.26 12:30
Camera sleep operation
If no operations are performed for the time set, the camera enters “sleep” (stand-by)
mode. In this mode, the monitor turns off and all actions are canceled. The camera
activates again when you touch any button (the shutter button,
mode. In this mode, the monitor turns off and all actions are canceled. The camera
activates again when you touch any button (the shutter button,
q button, etc.). The
camera will turn off automatically if left in sleep mode for 5 minutes. Turn the camera on
again before use.
again before use.