Olympus c-211 zoom Introduction Manual
37
1
Getting Started
5
Set the mode dial to PRINT (
).
• The monitor displays the screen shown at
left (with the EJECT line selected).
• New film packs include a light-blocking cover
sheet. You need to eject this sheet before
you can print.
you can print.
• If you have not yet loaded a SmartMedia
card (or if the card is loaded incorrectly) the
monitor displays the NO CARD message.
Load a card before proceeding (see
page 32).
monitor displays the NO CARD message.
Load a card before proceeding (see
page 32).
6
Press the OK button.
• The camera begins ejecting the cover sheet.
If you have not yet taken any pictures, the
monitor displays the NO PICTURES
message.
monitor displays the NO PICTURES
message.
• Don’t try to pull the sheet out while ejection
is in progress (while the motor is running
and the sheet is moving).
and the sheet is moving).
7
When the motor stops and the cover sheet
stops moving, remove the cover sheet
from the print outlet.
stops moving, remove the cover sheet
from the print outlet.
OK
ENTER
EJECT
CANCEL
EJECT THE
FILM COVER
FILM COVER
6
Loading a Film Pack (continued)
Monitor
(Eject the film cover screen)
(Eject the film cover screen)