Olympus E-5 Introduction Manual
103
EN
9
Cust
o
m
izi
n
g
your
c
a
mer
a
FOCUS RING
You can customize how the lens adjusts to the focal point
by selecting the rotational direction of the focus ring.
It is not applied for the mechanically-focus lenses such as
Olympus SWD lenses.
by selecting the rotational direction of the focus ring.
It is not applied for the mechanically-focus lenses such as
Olympus SWD lenses.
MF ASSIST
Set it to [ON] to automatically enlarge the subject on the monitor by rotating the focus ring
while shooting in [S-AF+MF] or [MF] with live view.
while shooting in [S-AF+MF] or [MF] with live view.
PSET HOME
You can register the AF target mode and the AF target position that you use frequently as
home position. Assign [
home position. Assign [
PSET HOME] to the specified button in [BUTTON FUNCTION] in
advance to use the registered home position quickly during shooting. “BUTTON
FUNCTION” (
FUNCTION” (
gP. 106)
PD AFL
Set it to [ON] to perform phase difference AF (AF with the mirror lowered) by pressing AEL/
AFL button while shooting with live view.
AFL button while shooting with live view.
AF ILLUMINAT. (AF Illuminator)
The built-in flash can be set to function as an AF illuminator. This makes focusing easier in
low-light conditions using AF mode. To use this function, raise the flash. It is available when
shooting with the phase difference AF (when shooting using the view finder).
low-light conditions using AF mode. To use this function, raise the flash. It is available when
shooting with the phase difference AF (when shooting using the view finder).
C-AF LOCK
When set to [ON], during focusing with C-AF mode, this prevents the focus from changing
even if the distance to the subject suddenly changes. This is effective when shooting at a
location where something passes in front of or behind the subject. It is available when
shooting using the view finder.
even if the distance to the subject suddenly changes. This is effective when shooting at a
location where something passes in front of or behind the subject. It is available when
shooting using the view finder.
AF AREA POINTER
When set to [OFF], the AF target does not light when the subject is in focus.
AF SENSITIVITY
You can set the range of the AF target for focusing when [AF AREA] is set to M. It is
available when shooting with the phase difference AF (when shooting using the view finder).
available when shooting with the phase difference AF (when shooting using the view finder).
[NORMAL] The camera focuses using a range that is somewhat larger than the selected
AF target.
[SMALL]
The camera focuses only within the selected AF target. When [SMALL] is
selected, the setting display for [AF AREA] becomes o.
selected, the setting display for [AF AREA] becomes o.
Near
Near
)
)
s0033_e_00_0_unified.book 103 ページ ２０１０年１１月１６日 火曜日 午後５時２４分