Longshine LCS-FSP8108-4 Leaflet

 

 

 

 

The device is a powerful, high-performance Fast Ethernet switch, with all 8 ports capable of 10 or 
100Mbps auto-negotiation operation (NWay) which means the switch could automatically negotiate 
with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting 
large networks into smaller, connected subnets for improved performance, enabling the bandwidth 
demanding multimedia and imaging applications. Moreover, the 10/100Mbps auto-sensing ability 
provides an easy way to migrate 10Mbps to 100Mbps network with no pain. 
This switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted 
cables. By integrating the data transmitting cable and power cord, it eliminates the effort constructing 
your network. You could easily connect a Wireless AP or a VoIP phone to this switch without looking 
outlets for them. Over current protection and circuit shorting protection are also supported to ensure 
the safety. The switch is plug-and-play without any software to configure and also fully compliant with 
all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the 
operating status of individual port and whole system. 
 

♦ 

Complies with 10BASE-T specifications of the IEEE802.3 standard 

♦ 

Complies with 100BASE-TX specifications of the IEEE802.3u standard 

♦ 

Compliant with IEEE 802.3af PoE standard (DTE power via MDI) 

♦ 

Provides 4 PoE ports with classification identify 

♦ 

Supports 15.4W maximum per PoE port 

♦ 

Supports over current protection and circuit shorting protection 

♦ 

8 * RJ-45 ports for 100BASE-TX and 10BASE-T connectivity 

♦ 

Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full) auto-detection 

♦ 

Supports MDI/MDI-X auto crossover 

♦ 

Wire-speed packet filtering and forwarding rate 

♦ 

Store-and-forward architecture filters fragment & CRC error packets 

♦ 

Supports 1K MAC entries 

♦ 

768K Bits buffer memory 

♦ 

Supports extensive LED indicators for network diagnostics 

♦ 

Internal universal switching power supply 

♦ 

FCC Class A, CE, VCCI Class A 

 

IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE 802.3afstandards

8 * 10/100Mbps RJ-45 NWay ports

Network speed: 10Mbps and 100Mbps 
Duplex mode: Full and Half

768K Bits for the whole system

10Mbps: 14,880pps/14,880pps; 100Mbps: 148,800pps/148,800pps

FCC Class A, CE, VCCI class A

System: Power (Green); Port: Link/Act (Green), PoE Act (Green)

0°- 40°C (32°- 104°F)

10% ~ 90% (non-condensing)

262 x 184 x 41 mm

48V 1.35A (100 ~ 240VAC, 47~63 Hz)

4016621006907