Olympus E-450 Introduction Manual

50

EN

Start shooting.
• In single-frame shooting, the exposure changes every 

time the shutter button is pressed.

• In sequential shooting, hold down the shutter button until 

the selected number of frames are taken.

• Releasing the shutter button stops auto bracketing 

shooting. When it stops, 

0 is displayed in green on 

the super control panel.

How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:

P mode : Aperture value and shutter speed

A mode : Shutter speed

S mode : Aperture value

M mode : Shutter speed

j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to 

the exposure value you have compensated.

The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to 
shoot in low light conditions. However, higher values may give pictures a grainy appearance.

: The sensitivity is set automatically according 

to the shooting conditions. With the [ISO-
AUTO SET] setting, you can set the 
maximum ISO that is set automatically. 

g“ISO-AUTO SET” (P. 87)

[100 - 1600]: Fixed ISO sensitivity.

To automatically set the optimal ISO in M mode:

j Normally, the AUTO setting is not available in M mode, but you can set it for use in all shooting 

modes. 

g“ISO-AUTO” (P. 87)

MENU[X][AE BKT]

i

p: [ISO]

MENU[W][ISO]

The exposure 
value for the next 
shot is displayed 
during shooting.

s0029_e_00_0_unified.book  Page 50  Monday, March 2, 2009  5:26 PM