Olympus evolt e-410 Introduction Manual

EN

 73

Customizing the settings/functions of your camera

Sets the metering mode for when pressing the 

AEL (AE lock) button to lock the exposure.

MENU[Y][AELMetering]

[AUTO]/[4]/[n]/[nHI]/[nSH]

• [AUTO] performs metering in the mode selected under [METERING] mode.

This lets you apply the same compensation value to all the white balance modes at once.
MENU[Y][ALL>]

: The same compensation value applies to all WB modes.

: The WB compensation value settings applied to each WB mode are all 

cleared at once.

1) Use 

bd to select the color direction.

R-B Red

kBlue/G-M GreenkMagenta

2) Use 

ac to set compensate value. “WB Compensation” (g P. 56)

• You can check the white balance you have adjusted.

1) Use 

ac to select [YES].

The built-in flash pops up automatically in low light or backlight conditions while in the 

AUTO 

or scene mode.
This allows you to stop the built-in flash from popping up automatically.
MENU[Y][AUTO POP UP]

: The built-in flash pops up automatically.

[OFF] : The built-in flash will not pop up automatically.

7 FUNCTION

This lets you assign a function to the 

b button.

MENU[Y][7 FUNCTION]

Does not allow function allocation.

V]

Press the 

b button to acquire the WB value.

g “Setting the one-touch white balance” (P. 57)

Pressing the shutter button while pressing the 

b button enables you to check the 

picture you have just taken on the monitor without having to record the picture to the 
card. This is useful when you want to see how a picture turned out without saving it.

While holding down the 

b button, you can use the preview function.

g “Preview function” (P. 34)

s0013_e_00_unified.book  Page 73  Monday, March 5, 2007  10:04 AM