Olympus sp-570 uz User Manual

   EN

Ge

tt

in

g to kno

w

 you

r came

ra

 b

e

tt

er

• Insert the batteries in the correct direction.

• Insert new batteries. When using rechargeable batteries, charge the batteries.

• Battery performance declines in low temperatures, and the charge may not be sufficient to 

turn on the camera. Remove the battery and warm it by putting it in your pocket for a while.

• If the contact area of the card is contaminated, data in the card cannot be read and the 

[CARD SETUP] screen may appear. In this case, select [CLEAN CARD], press 

o, remove 

the card, and then wipe the contact area with a soft dry cloth.

• To save battery power, the camera automatically enters sleep mode and the monitor turns 

off if there is no operation for a certain amount of time when the camera is turned on (the 
lens is extended and the monitor is on). You can select the time to enter the sleep mode 
from 1, 3, 5 or 10 minutes. No picture is taken even if the shutter button is fully pressed in 
this mode. Operate the shutter button or other buttons to restore the camera from sleep 
mode before taking a picture. If the camera is further left for 12 minutes, it automatically 
turns off (the lens retracts and the monitor turns off). Return the power switch to OFF and 
then set the power switch to ON.

q

• This is the playback mode for displaying pictures on the monitor. Set the mode dial to a 

shooting mode.

g

• No pictures can be taken when the shooting guide is being displayed. Take a picture after 

making the settings following the shooting guide, or turn the mode dial and set it to the 
position other than 

g in the shooting mode.

• Wait until 

# (flash charge) stops blinking before taking the picture.

• With prolonged camera use, the internal temperature may increase, resulting in automatic 

shutdown. If this occurs, remove the battery from the camera and wait until the camera has 
sufficiently cooled. The camera’s external temperature may also increase during use, 
however this is normal and does not indicate malfunction.

• Press u to switch to the viewfinder.

• Press u to switch to the monitor.