Olympus SZ-16 Instruction Manual

78 EN

 

• The camera may malfunction if it is used in a location where 

it is subject to a magnetic/electromagnetic fi eld, radio waves, 
or high voltage, such as near a TV set, microwave, video 
game, loud speakers, large monitor unit, TV/radio tower, or 
transmission towers. In such cases, turn the camera off and on 
again before further operation.

 

• Always observe the operating environment restrictions 

described in the camera’s manual.

 

• The camera uses a lithium ion battery specifi ed by Olympus. 

Charge the battery with the specifi ed USB-AC adapter or 
charger. Do not use any other USB-AC adapters or chargers.

 

• Never incinerate or heat batteries in microwaves, on hot 

plates, or in pressure vessels, etc.

 

• Never leave the camera on or near electromagnetic devices.

This may cause overheating, burning, or exploding.

 

• Do not connect terminals with any metallic objects.

 

• Take precautions when carrying or storing batteries to prevent 

them from coming into contact with any metal objects such as 
jewelry, pins, fasteners, keys, etc.
The short circuit may cause overheating, exploding, or burning, 
which burn or damage you.

 

• Never store batteries where they will be exposed to direct 

sunlight, or subjected to high temperatures in a hot vehicle, 
near a heat source, etc.

 

• To prevent causing battery leaks or damaging their terminals, 

carefully follow all instructions regarding the use of batteries. 
Never attempt to disassemble a battery or modify it in any 
way, solder, etc.

 

• If battery fl uid gets into your eyes, fl ush your eyes immediately 

with clear, cold running water and seek medical attention 
immediately.

 

• Always store batteries out of the reach of small children. If a 

child accidentally swallows a battery, seek medical attention 
immediately.

 

• If you cannot remove the battery from the camera, contact an 

authorized distributor or service center. Do not try to remove 
the battery by force.
Damage to the battery exterior (scratches, etc.) may produce 
heat or an explosion.

 

• Do not wet batteries with fl uid such as water or seawater.

 

• To prevent batteries from leaking, overheating, or causing a 

fi re or explosion, use only batteries recommended for use with 
this product.

 

• Insert the battery carefully as described in the operating 

instructions.

 

• If rechargeable batteries have not been recharged within the 

specifi ed time, stop charging them and do not use them.

 

• Do not use a battery if it is cracked or broken.

 

• If a battery leaks, has unusual odor, becomes discolored or 

deformed, or becomes abnormal in any other way during 
operation, stop using the camera, and keep away from fi re 
immediately.

 

• If a battery leaks fl uid onto your clothing or skin, remove the 

clothing and fl ush the affected area with clean, running cold 
water immediately. If the fl uid burns your skin, seek medical 
attention immediately.

 

• Never subject batteries to strong shocks or continuous 

vibration by dropping or hitting.
This may cause exploding, overheating, or burning.

 

• Before loading, always inspect the battery carefully for leaks, 

discoloration, warping, or any other abnormality.

 

• The battery may become hot during prolonged use. To avoid 

minor burns, do not remove it immediately after using the 
camera.

 

• Always unload the battery from the camera before storing the 

camera for a long period. 
Leaking and overheating may cause fi re, injury, or malfunction.

 

• When storing the battery for a long period, select a cool 

location for storage.

 

• This camera uses one Olympus lithium ion battery. Use the 

designated battery. There is a risk of explosion if the battery is 
replaced with the incorrect battery type.

 

• Power consumption by the camera varies depending on which 

functions are used.

 

• During the conditions described below, power is consumed 

continuously and the battery becomes exhausted quickly.

 

• The zoom is used repeatedly.

 

• The shutter button is pressed halfway repeatedly in shooting 

mode, activating the auto focus.

 

• A picture is displayed on the monitor for an extended period 

of time.

 

• The camera is connected to a printer.