Olympus DS-2000 Introduction Manual
41
T
raining your PC for V
oice Recognition
Training your PC for Voice Recognition
When you use voice-recognition software such as IBM ViaVoice, it is recommended that you set
the recorder to PC microphone and have the software learn the characteristics of the speaker’s
voice and the recorder’s built-in microphone to maximize the accuracy of voice recognition.
the recorder to PC microphone and have the software learn the characteristics of the speaker’s
voice and the recorder’s built-in microphone to maximize the accuracy of voice recognition.
1
Connect the KP-4 PC connection
cable (supplied) to the recorder’s
earphone jack and the PC
microphone jack of your PC.
cable (supplied) to the recorder’s
earphone jack and the PC
microphone jack of your PC.
2
Start the software on your PC and
prepare it to receive voice input.
(Refer to the User’s manual of the
software for details.)
prepare it to receive voice input.
(Refer to the User’s manual of the
software for details.)
3
Press and hold the FOLDER button
to get into PC train mode.
to get into PC train mode.
The record/play indicator lamp lights in red,
and “TRAIN PC” flashes on the display,
while you are holding the FOLDER button
pressed.
and “TRAIN PC” flashes on the display,
while you are holding the FOLDER button
pressed.
4
Speak into the recorder’s
microphone.
microphone.
................................................................................................
Notes
• When the recorder is connected to a PC with USB connection, you
cannot perform these procedures.
• While the recorder is set as PC microphone, the output level of the
earphone jack is fixed.
• Refer to the user's manuals of DSS Player 2002 and your voice
recognition software for details.
PC
To the PC’s
microphone jack
microphone jack
INDEX
STOP
ERASE
MENU
REC
Earphone jack