Olympus SP-810 UZ Instruction Manual

26 EN

3

  Move the camera slowly while keeping it straight, and 

stop the camera where the pointer and target mark 
overlap.

 

The camera releases the shutter automatically.

  To combine only two pictures, press the 

A button 

before taking a third frame.

4

 Repeat Step 3 to take a third frame.

 

After the third frame is taken, the camera 
automatically processes the frames and the 
combined panorama image is displayed.

  To exit the panorama function without saving an 

image, press the 

 button.

  If the shutter does not automatically release, try 

[Manual] or [PC].

1

 Use 

FGHI to specify at which edge the next 

picture is to be connected.

Direction for combining 

the next frame

2

  Press the shutter button to take the fi rst frame. The 

white-boxed part of the fi rst frame is displayed on joint 
area 1. 

1st frame

3

  Compose the next shot so that joint area 1 overlaps 

joint area 2.

4

  Press the shutter button to take the next shot.

 Press the 

A button to combine just 2 frames.

5

 Repeat steps 3 and 4 to take a third frame.

 

After the third frame is taken, the camera 
automatically processes the frames and the 
combined panorama image is displayed.

  To exit the panorama function without saving an 

image, press the 

 button.

1

 Use 

FGHI to select the direction that the frames 

are combined.

2

  Press the shutter button to take the fi rst frame, and 

then point the camera for the second frame. The 
shooting procedure is same as that of [Manual].

  Panorama shooting is possible for up to 10 frames.

3

 Repeat Step 2 until the number of desired frames is 

taken, and then press the 

A button or 

 button 

when fi nished.

  Refer to the PC software help guide for details on 

how to make panorama images.