Olympus VG-130 Introduction Manual

Page of 76
14 EN
2
  Follow the on-screen instructions on your 
computer.
  If nothing is displayed on the camera screen even 
after connecting the camera to the computer, the 
battery may be exhausted. Leave the camera 
connected to the computer until the battery has 
charged, then disconnect and reconnect the camera.
Connecting the camera
Connecting the camera
Multi-connector
USB cable (supplied)
Computer (on and running)
Indicator lamp
Connector cover
3
  Register your Olympus product.
Click the “Registration” button and follow the on-
screen instructions.
4
  Install OLYMPUS Viewer 2 and [ib] computer 
software.
Check the system requirements before beginning 
installation.
Click the “OLYMPUS Viewer 2” or “OLYMPUS ib” 
button and follow the on-screen instructions to 
install the software.
OLYMPUS Viewer 2
Operating 
System
Windows XP (Service Pack 2 or later) /
Windows  Vista / Windows  7
Processor
Pentium 4  1.3 GHz or better
RAM
1 GB or more (2 GB or more 
recommended)
Free Hard 
Drive Space
1 GB or more
Monitor 
Settings
1024 × 768 pixels or more
Minimum 65,536 colors 
(16,770,000 colors recommended)
[ib]
Operating 
System
Windows XP (Service Pack 2 or later) /
Windows  Vista / Windows  7
Processor
Pentium 4  1.3 GHz or better
(Pentium D  3.0 GHz or better required 
for movies)
RAM
512 MB or more (1 GB or more 
recommended)
(1 GB or more required for movies — 2 GB 
or more recommended)
Free Hard 
Drive Space
1 GB or more
Monitor 
Settings
1024 × 768 pixels or more
Minimum 65,536 colors (16,770,000 
colors recommended)
Graphics
A minimum of 64 MB video RAM with 
DirectX 9 or later.
*  See online help for information on using the software.
5
  Install the camera manual.
Click the “Camera Instruction Manual” button and 
follow the on-screen instructions.