Gefen EXT-3GSDI-FO-141 Leaflet

Extend 3G-SDI over fiber up to 18 miles (30km)

•  Supports SMPTE-424M (3G-SDI), SMPTE-292M (HD-SDI), SMPTE-259M (SDl), 

    DVB-ASI specifications

•  Input Impedance: 75 Ohm

•  Data Rate: up to 3 Gbps

•  Signal Level: 800mV (p-p) +/- 50mV

•  Optical Fiber Types: ST (Multi mode and Single mode)

•  Number of Fibers: 1

•  Output Connector: BNC Female

•  Distance: Up to 18 miles (30 kilometers) using single-mode fiber. Up to 1km 

   using multimode fiber

•  Propagation Delay (Sender): 1.5 ns

•  Propagation Delay (Receiver): 40 ns

•  Dimensions: 0.77"W x 0.77"H x 1.97"D

•  Power Supply: 5V DC @ 0.5 A

•  Power Budget: 16dB

•  Operating Temperature: -20 to +80C

•  Wavelength (Sender Unit): 1290 nm (min), 1310 nm (typ), 1330 nm (max)

•  Wavelength (Receiver Unit): 1100 nm (min), 1310 nm (typ), 1650 nm (max)

•  Shipping Weight: 1.3 lbs

  

The Gefen 3GSDI Fiber Optic Extender is a miniature serial digital 
video transport system extending video over fiber optic cable
supporting 1080p for 3G-SDI. It converts a one-channel
SMPTE-424M,3G-SDI, SMPTE-292M HD, or SMPTE-259M 
serial digital video signal over extended distances up to18 miles
(30 kilometers) by using single-mode or up to 1640 feet (500 meters)
milti-mode fiber optic cable, terminated in ST.

  A digital video source is connected to the 3GSDI Fiber Optic 
  Extender sender. Next, connect the sender and receiver via fiber optic
  cable. Apply power to both sender and receiver units. Finally, connect
  the receiver unit to the 3G-SDI digital output destination.

•  Extends up to 18 miles (30 kilometers)

•  HD-SDI BNC input connector and ST terminated fiber optical connector

•  Automatic Input Equalization

•  Latch-Locking Power Connector

•  Robust metal die-casting enclosure for harsh environment

•  Transports Multi-rate HD-SDI Digital Video over 1 Fiber

EXT-3GSDI-FO-141