Olympus PEN-F Instruction Manual

EN

You can zoom in on a portion of the frame when adjusting focus. Choosing a high 
zoom ratio allows you to use autofocus to focus on a smaller area than is normally 
covered by the AF target. You can also position the focus target more precisely.

•  Super Spot AF is available only when [mode2] is selected for [LV Close Up Mode] (P. 108 ).

Shooting display

Zoom frame AF

Zoom AF

U

U

U

U

U

U

U

 (Press and hold) 

/

 

Q

Press and release the U button to display the zoom frame.

•  If the camera was focused using autofocus just before the button was pressed, the 

zoom frame will be displayed at the current focus position. 

• Use 

FGHI to position the zoom frame.

• Press the 

INFO button and use FG to choose the zoom ratio. (×3, ×5, ×7, ×10, 

×14)

Press and release the U button again to zoom in on the zoom frame.

• Use 

FGHI to position the zoom frame.

•  You can change the zoom ratio by rotating the front dial (

r) or rear dial (o).

Press the shutter button halfway to initiate autofocus.

•  The camera will focus using the subject in the frame at the center of the screen. Use 

FGHI to choose a different focus position.

•  Zoom is visible only in the monitor and has no effect on the resulting photographs.
•  When you are using a Four Thirds system lens, the AF will not operate with during zoom 

display.

•  While zoomed in, a sound is made by the IS (Image Stabilizer).