Olympus PEN-F Introduction Manual

EN

Connect the camera to the printer using the supplied USB cable and turn the 
camera on.

•  When the camera is turned on, a dialog should be displayed in the monitor prompting 

you to choose a host. If it is not, select [Auto] for [USB Mode] (P. 108 ) in the camera 
custom menus.

Follow the operation guide to set a print option.

Selecting the print mode
Select the type of printing (print mode). The available print modes are as shown below.

Prints selected pictures.

Prints all the pictures stored in the card and makes one print for 
each picture.

Prints multiple copies of one image in separate frames on a single 
sheet.

Prints an index of all the pictures stored in the card.

Prints according to the print reservation you made. If there is no 
picture with print reservation, this is not available.

Setting the print paper items
This setting varies with the type of printer. If only the printer’s STANDARD setting is 
available, you cannot change the setting.

Sets the paper size that the printer supports.

Selects whether the picture is printed on the entire page or inside a 
blank frame.

Selects the number of pictures per sheet. Displayed when you have 
selected [Multi Print].

Selecting pictures you want to print
Select pictures you want to print. The selected pictures can 
be printed later (single-frame reservation) or the picture 
you are displaying can be printed right away.

f)

Prints the currently displayed picture. If there is a picture that [Single 
Print] reservation has already been applied to, only that reserved 
picture will be printed.

t)

Applies print reservation to the currently displayed picture. If you 
want to apply reservation to other pictures after applying [Single 
Print], use 

HI to select them.

u)

Sets the number of prints and other items for the currently displayed 
picture, and whether or not to print it. For operation, refer to “Setting 
printing data” in the next section.