Olympus PEN-F Introduction Manual

Page of 184
157
EN
Information
8
Monitor 
indication
Possible cause
Corrective action
 
m
The internal temperature of 
the camera has risen due to 
sequential shooting.
Turn off the camera and wait for 
the internal temperature to cool.
Internal camera 
temperature is too 
high. Please wait 
for cooling before 
camera use.
Wait a moment for the camera to 
turn off automatically. 
Allow the internal temperature 
of the camera to cool before 
resuming operations.
Battery Empty
The battery is drained.
Charge the battery.
No Connection
The camera is not correctly 
connected to a computer, printer, 
HDMI display, or other device.
Reconnect the camera.
No Paper
There is no paper in the printer.
Load some paper in the printer.
No Ink
The printer has run out of ink.
Replace the ink cartridge in the 
printer.
Jammed
The paper is jammed.
Remove the jammed paper.
Settings Changed
The printer’s paper cassette has 
been removed or the printer has 
been manipulated while making 
settings on the camera.
Do not manipulate the printer 
while making settings on the 
camera.
Print Error
There is a problem with the 
printer and/or camera.
Turn off camera and printer. 
Check the printer and remedy any 
problems before turning the power 
on again.
Cannot Print
Pictures recorded on other 
cameras may not be printed on 
this camera.
Use a personal computer to print.
The lens is locked. 
Please extend the 
lens.
The lens of the retractable lens 
stays retracted.
Extend the lens. (P. 15 )
Please check the 
status of a lens.
An abnormality has occurred 
between the camera and the 
lens.
Turn off the camera, check the 
connection with the lens, and turn 
the power on again.