Olympus WS-710M Introduction Manual

Page of 92
2
26
EN
Recording
R
e
cording
• [
•] will appear on the display.
•  When operating in [Recorder] mode, the 
last file recorded using the microphone 
will be play back.
•  When operating in [FM Radio] mode, 
the recorder will automatically enter 
[Recorder] mode, and the last file 
recorded from the FM radio will play 
back.
Pause
While the recorder is during 
recording mode, press the REC (
s
button.
• [
≠] will appear on the display.
•  The recorder will time out after 60 
minutes  when left in [Rec Pause].
Resume Recording:
Press the REC (
s) button again.
•  Recording will resume at the point of 
interruption.
To quickly check on the recorded contents
While the recorder is during recording 
mode, press the 
OK 
`/MENU
 button.
Settings relating to Recording
[Mic Sense]
(
 P.47, P.49)
Sets the recording sensitivity. 
[Rec Mode] *1
(
 P.47, P.49)
Sets the recording rate for 
each recording format.
[Zoom Mic]  *2
(
 P.47, P.50)
Sets the directivity of the 
builtin stereo microphone
[Low Cut Filter]
(
 P.47, P.50)
This function can reduce 
noise from air conditioners, 
projectors and other similar 
noises.
[VCVA] 
(
 P.47, P.50)
Sets the threshold level for 
the Variable Control Voice 
Actuator (VCVA).
[V-Sync. Rec] 
(
 P.47, P.51)
Sets the start level for voice 
sync recording. 
[Rec Scene]
(
 P.47, P.52)
Sets the recording settings 
which matches the recording 
condition or environment. 
*1 For WS-710M (In [FM Radio] mode, the 
only setting of the [Rec Mode] settings 
you can change is the recording fi le 
format).
*2 For WS-710M only.
For WS-710M, WS-700M only:
•  We recommend formatting the record 
media in the recorder before recording 
(
☞ P.63).
•  When a microSD card is inserted in the 
recorder, be sure to confi rm the recording 
media as either [Built-in Memory
or [microSD Card] so that there is no 
mistake (
☞ P.47, P.57).
• If 
the 
REC (
s) button is pressed when a 
function other than the record function 
is specifi ed, [Cannot record in this 
folder
] is displayed. Select a folder from 
[Folder A] through [Folder E] and start 
recording again.