Olympus WS-801 Introduction Manual

g t
h

e t
im

e a

d d
a

If you set the time and date before using
the recorder, recording time and date
information is automatically stored for each
file. Setting the time and date beforehand
enables easier file management.

  When you use the recorder for the
first time, or when the battery is
inserted after the recorder has not
been used for a long time, [   Set  time
& date   ] will appear. When “  Hour  ” is
flashing, conduct setup from Step 1.

Press the

9 or 0 button to

select the item you want to set.

•

Select “ Hour ”, “ Minute ”, “ Year ”,
“ Month ” or “ Day ” by moving the
flashing position.

Press the + or − button to change

the value.

• Follow the same steps by pressing the

9 or 0 button to select the next
item, and pressing the + or − button
to change the value.

• You can select between 12 and 24

hour display by pressing the LIST
button while setting the hour and
minute.

Example: 10:38 P.M

10:38 PM
(Initial setting)

22:38

• You can select the order of “ Month ”,

“ Day ” and “ Year ” by pressing the
LIST button while setting these items.

Example: March 24, 2012

3M 24D 2012Y
(Initial setting)

24D 3M 2012Y

2012Y 3M 24D

Setting the time and date [ Time & Date ]

• The clock will start from the set date

and time. Press the

` OK button when

you want the clock to start.

Note

• If you press the

` OK button during the

setup operation, the recorder will save
the items that were set to that point.

Press the

` OK button to

complete the setting.

+ − button

9 0 button

` OK button