Olympus WS-801 Introduction Manual

Page of 95
86
7
EN
Troubleshooting
Troubleshooting
 Symptom 
 Probable  cause 
 Action 
 Recording level too 
high 
 WS-803  only: 
 The recording level has not been 
adjusted. 
 Adjust the recording level and then try 
recording once more ( 
☞  P.56). 
 This could potentially be because 
the recording level and output level 
for connected external devices is 
too high. 
 If you cannot record clearly even 
after adjusting the recording level, 
then adjust the output level for the 
connected devices ( 
☞  P.56). 
 Voice files are not 
recorded in stereo 
 The connected external microphone 
is monaural. 
 When an external monaural 
microphone is connected for 
recording audio, audio is recorded to 
the L channel only. 
 [  Rec  Mode  ] is set to a monaural 
recording mode. 
 Set  [  Rec  Mode  ] to the stereo
recording mode ( 
☞  P.56). 
 WS-803  only: 
 [  Zoom  Mic  ] is set to the  +   side.   
 Set  [  Zoom  Mic  ] to [  Off  ]  ( 
☞  P.57). 
 Cannot  find  the 
recorded Voice File 
 Wrong  folder. 
 Switch to the correct folder
☞  P.26 to P.28). 
 Noise heard during 
playback 
 The recorder was shaken during 
recording. 
 ——— 
 The recorder was placed near a cell 
phone or fluorescent lamp while 
recording or during playback. 
 Move  the  recorder. 
 Silent portions not 
skipped during 
playback 
 WS-803,  WS-802  only: 
 The  [  Voice  Detect  ] process has not 
been performed. 
 Extract voice portions using 
 Voice  Detect  ]. 
 [  Voice  Playback  ] is set to [  Off  ].  
Set 
 Voice  Playback  ] to [  On  ].  
 Unable to erase the 
file 
 The  file  is  locked. 
 Unlock the file ( 
☞  P.55). 
 The  file  is  read-only. 
 Unlock the file or cancel the file’s read-
only setting on the PC. 
 Unable to erase the 
folder 
The folder contains a file which cannot 
be recognized by the recorder.
 Connect the recorder to your PC and 
erase the folder ( 
☞  P.79).