Olympus WS-803 Introduction Manual

d

b

a

c

a

e

f

 •  To ensure that you do not lose the 

beginning of the recording, verify that 
the LED indicator light or the mode 
indicator is lit on the display. 

 •  When the remaining recording time is 

less than 60 seconds, the LED indicator 
light starts flashing. When the remaining 
recording time drops to 30 and then 10 
seconds, the light flashes faster. 

☞  P.26). 

s ) button to start 

 •  The LED indicator light turns on and 

[ 

K ] appears on the display. 

 •  Turn the microphone in the direction 

of the source to be recorded. 

  

a  Recording  mode  indicator 
  

b  Elapsed recording time 
  

c  Remaining memory bar indicator 
  

d  Remaining recording time 
  

e  Level meter (changes according to 

the recording level and recording 
function settings) 

  

f  File  length 

 Before starting recording, select a folder 
among [ 

& ] to [ * ]. These five folders can be 

used to categorize recorded information 
according to type; for example, Folder [ 

& ] 

might be used to store private information, 
while Folder [ 

' ] might be dedicated to 

holding business information. 

s )  button 

4 )  button 

 • 

[  Rec  Mode  ] cannot be changed in 
recording standby mode or while 
recording. Configure this while the 
recorder is stopped ( 

☞  P.56). 

 •  The proper position of the built-in 

stereo microphone for performing 
stereo recording is over the display. If 
the microphone is below the display 
during recording, proper stereo 
recording is impossible because the 
original sound will be recorded in 
reverse phase. 

4 ) button to stop 

 • 

[ 

L ] appears on the display.