Olympus Tough TG-820 iHS Introduction Manual

Page of 83
37
EN
Selecting the focusing area [AF Mode]
Selecting the focusing area [AF Mode]
z
 (Camera Menu 1)  AF Mode
Submenu 2
Application
Face/iESP
The camera focuses automatically. 
(If a face is detected, it is shown by 
a white frame
*1
; when the shutter 
button is pressed halfway and the 
camera focuses, the frame turns to 
green
*2
. If no face is detected, the 
camera chooses a subject in the 
frame and focuses automatically.)
Spot
The camera focuses on the subject 
located within the AF target mark.
AF Tracking
The camera tracks the subject 
movement automatically to focus on 
it continuously.
*1
  For some subjects, the frame may not appear or may 
take some time to appear.
*2
  If the frame blinks in red, the camera cannot focus. Try 
refocusing on the subject.
To focus on a moving subject 
To focus on a moving subject 
continuously (AF Tracking)
continuously (AF Tracking)
1
  Hold the camera to align the AF target mark on the 
subject and press the 
A button.
2
  When the camera recognizes the subject, the AF 
target mark automatically tracks the subject movement 
to focus on it continuously.
3
  To cancel the tracking, press the 
A button.
  Depending on the subjects or the shooting conditions, 
the camera may be unable to lock the focus or fail to 
track the subject movement.
  When the camera fails to track the subject movement, 
the AF target mark changes to red.
Selecting the method for measuring the 
Selecting the method for measuring the 
brightness [ESP/
brightness [ESP/n
n]]
z
 (Camera Menu 1)  ESP/n
Submenu 2
Application
ESP
Shoots to obtain a balanced 
brightness over the entire screen 
(Meters the brightness at the center 
and surrounding areas of the screen 
separately).
5 (spot)
Shoots the subject at the center 
during backlighting (Meters the 
brightness at the center of the 
screen).
  When set to [ESP], the center may appear dark when 
shooting against strong backlighting.
Shooting at higher magnifi cations than 
Shooting at higher magnifi cations than 
optical zoom [Digital Zoom]
optical zoom [Digital Zoom]
z
 (Camera Menu 1)  Digital Zoom
Submenu 2
Application
Off
Disable digital zoom.
On
Enable digital zoom.
  [Digital Zoom] is not available when [a Super 
Macro] or [N S-Macro LED] (p. 30) is selected.
  The option selected for [Digital Zoom] affects the 
appearance of the zoom bar.
“To take larger images” (p. 19)