Olympus Stylus XZ-2 iHS Instruction Manual

EN

You can reset all print reservation data or just the data for selected pictures.

Press 

Q during playback and select [<].

Select [

<] and press Q.

•  To remove all pictures from the print order, select [Reset] and press 

Q. 

To exit without removing all pictures, select [Keep] and press 

Q.

Press 

HI to select images you wish to remove from the print order.

• Use 

G to set the number of prints to 0. Press 

Q once you have removed all the 

desired pictures from the print order.

Select the date and time format and press 

Q.

•  This setting is applied to all frames with print reservation data.

Select [Set] and press 

Q.

By connecting the camera to a PictBridge-compatible printer with the USB cable, you 
can print out recorded pictures directly.

Connect the camera to the computer using the supplied USB cable and 
turn the camera on.

USB port

Smaller 
terminal

USB cable

 Multi-connector

•  Use a fully charged battery for printing.
•  When the camera is turned on, a dialog should be displayed in the monitor prompting 

you to choose a host. If it is not, select [Auto] for [USB Mode] (P. 60) in the camera 
custom menus.

Use 

FG to select [Print].

•  [Do Not Remove USB Cable] will be displayed, 

followed by a print-mode selection dialog.

•  If the screen is not displayed after a few minutes, 

disconnect the USB cable and start again from Step 1.

#

 Cautions

•  RAW images and movies can not be printed.