Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch Administrator's Guide
Security Management
219
ProSAFE M4100 Managed Switches
Web Interface: Configure a Protected Port to Isolate Ports on
the Switch
the Switch
1.
Create a DHCP pool:
Note:
This example assumes that the DHCP service is enabled. For
information about how to enable the DHCP service, see the Web
interface procedure in
information about how to enable the DHCP service, see the Web
interface procedure in
a. Select System > Services > DHCP Server > DHCP Server Configuration.
A screen similar to the following displays.
b. Under DHCP Pool Configuration, enter the following information:
•
In the Pool Name field, select Create.
•
In the Pool Name field, enter pool-a.
•
In the Type of Binding field, select Dynamic.