Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch Installation Guide
Version 1.0
NETWORK SETUP
Physical setup
FVX538 connected to the Internet via a modem or modem/router
FVS338 connected to the Internet via a modem or modem/router
VPN Client PCs connected Wireless/Wired to the Internet (via a LAN allowing IPSEC
traffic)
traffic)
Logical setup
FVX538
LAN IP: 172.22.101.101/24
DHCP: 172.22.101.0/24
Mode Config DHCP: 192.168.0.0/24
Firmware version: 3.5.0.24
FVS338
LAN IP: 172.22.102.102/24
DHCP: 172.22.102.0/24
Firmware version: 3.5.0.24
Firmware version: 3.5.0.24
VPN Client
Version: 10.8.3
NIC IP: 192.168.0.x/24
VPN configuration
The setup will require the creation of multiple VPN policies:
FVX538
-
1x Box-to-box policy from the FVX538 to the FVS338 (Policy name: BoxtoBox)
-
1x Client-to-Box policy on the FVX538 to connect to the VPN clients (Policy name:
LAN1toVPN)
LAN1toVPN)
-
1x Manual VPN policy using the IKE policy used for the box-to-box connection to
allow the VPN clients to connect to the LAN behind the FVS338 (Policy name:
LAN2toClient)
allow the VPN clients to connect to the LAN behind the FVS338 (Policy name:
LAN2toClient)
FVS338
-
1x Box-to-box policy from the FVS338 to the FVX538 (Policy name: BoxtoBox)
-
1x Manual VPN policy using the IKE policy used for the box-to-box connection to
allow the FVS338 to connect to the VPN clients (Policy name: LAN2toClient)
allow the FVS338 to connect to the VPN clients (Policy name: LAN2toClient)
VPN Client
-
-
1x Policy connecting to the Public address of the FVS338 specifying as the IP range
for the Remote party 172.22.0.0 mask 255.255.0.0 (class full only mask accepted)
for the Remote party 172.22.0.0 mask 255.255.0.0 (class full only mask accepted)