Netgear JWNR2000v2 - Wireless-N 300 Router Installation Guide
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Step 1:
Connect your modem.
Step 2:
Connect your router.
Step 3:
Connect your computer.
Step 6:
Configure settings.
Open a browser, such as
Internet Explorer. If the web
Internet Explorer. If the web
http://www.routerlogin.net
the setup.
Step 5:
Power on your router.
Wait until the power
LED turns solid green.
Step 4:
Power on your modem.
Wait until your modem cycles on
(approximately 2 minutes).
(approximately 2 minutes).
Note:
If you have a battery-backed modem,
press the reset button. In some cases, you may
need to remove, then re-insert, the battery to recycle
your modem.
need to remove, then re-insert, the battery to recycle
your modem.
DSL or Cable
Modem
Laptop or Desktop
Computer
Package Contents:
N300 Wireless Router
JWNR2000v2
Installation Guide
Ethernet cable
(not included)
DSL or Cable
Internet
CAUTION:
MAKE SURE YOUR MODEM IS
TURNED OFF OR UNPLUGGED
BEFORE STARTING THE
INSTALLATION.
N300 Wireless Router
(not included)
WPS push button
page doesn’t display, close
and re-open the browser to
and re-open the browser to
in the address bar to complete
Power on/off
button
N300 Wireless Router
Power Adapter
Ethernet Cable
Attach the STAND to the ROUTER:
1. Place the stand on a level surface.
2. Slide the router onto the stand.
Slide-on
Router Stand