Netgear WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

Remote Management

You can enable SSH or Telnet in order to remotely log in to the controller or access point 
groups.

Remote Console for the Wireless Management System

From the Maintenance tab select Remote Management > System > Remote Console:

Select the radio button for SSH or Telnet:

: If set to Enable, the wireless management system will allow 

remote access by using Secure Shell.

: If set to Enable, the wireless management system allows remote access by 

using Telnet.

Click Apply to save your settings.

Advanced Remote Console for Access Point Groups

Enable SSH or Telnet to log in to managed access points. These settings are applied only on 
managed ProSafe access points that support SSH and Telnet.

Use the Group tab to select the settings for a specified group of access points. The 

access points that have not been assigned any group share the settings of Group 1.

: If set to Enable, the access points allow remote access using 

Secure Shell.

: If set to Enable, the access points allow remote access using Telnet.

Click Apply to save the selected settings.