Netgear WC7520 - ProSafe 20-AP Wireless Controller Reference Manual
Access Point Discovery and Management
62
ProSafe 20-AP Wireless Controller WC7520
5.
Click Apply to save your settings.
6.
Click Back to return to the Managed AP List.
To remove an access point from the Managed AP List:
1.
On the Managed AP List, select the check box to the right of the access point that you
want to remove.
want to remove.
2.
Click Remove.
Note:
To restore a managed access point to its original firmware and use it
once again as a standalone access point, remove the access point
from the Managed AP List. Log in to the access point’s web
management interface, upgrade the firmware to the standalone AP
firmware version, and then reboot the access point.
from the Managed AP List. Log in to the access point’s web
management interface, upgrade the firmware to the standalone AP
firmware version, and then reboot the access point.
Plan Settings section
Site
The site designation that you have selected (see
Building
After you have configured buildings (see
page 42), select the building in which the access point is located from the
drop-down list.
drop-down list.
Floor
page 42), select the floor on which the access point is located from the drop-down
list.
list.
Location
Enter a name that is meaningful to you.
Table 7. Access point settings (continued)
Setting
Description