Netgear WC7520 - ProSafe 20-AP Wireless Controller Reference Manual
Managing Security Profiles and Profile Groups
78
ProSafe 20-AP Wireless Controller WC7520
3.
Click the + button to add a profile to the basic profile group. The Add Profiles pop-up window
displays:
displays:
Figure 37.
4.
Either click Add, or, if you want to clone an existing profile, select the Clone an existing
Profile check box, select a profile from the Profiles drop-down list, and then click Add. The
newly created profile displays onscreen, and the tab for the new profile is automatically
selected to let you configure the new profile.
Profile check box, select a profile from the Profiles drop-down list, and then click Add. The
newly created profile displays onscreen, and the tab for the new profile is automatically
selected to let you configure the new profile.
Note:
The selections that are available in the Network Authentication field
are affected by the authentication server settings that you specify on
the Authentication Server screen. See
the Authentication Server screen. See
selection in the Network Authentication field requires authentication,
an additional field, the corresponding Authentication Server field,
displays.
an additional field, the corresponding Authentication Server field,
displays.
5.
Configure the settings as described in the following table:
Table 15. Basic security profile definition settings
Setting
Description
Profile Definition section
Name
Enter a unique name to identify the profile. This value can be up to
32 alphanumeric characters. Use meaningful profile names instead of the
default names. The default profile names are Profile1, Profile2, and so on,
through Profile8.
32 alphanumeric characters. Use meaningful profile names instead of the
default names. The default profile names are Profile1, Profile2, and so on,
through Profile8.
Wireless Network Name
(SSID)
(SSID)
Enter a unique name for the wireless network associated with this profile.
Broadcast Wireless
Network Name
Network Name
Select the Yes radio button to enable broadcast of the SSID. This is the default
setting. Select the No radio button to disable broadcast of the SSID, in which
case only devices that have the correct SSID can connect to the access point.
setting. Select the No radio button to disable broadcast of the SSID, in which
case only devices that have the correct SSID can connect to the access point.