Netgear WC7600v2 – ProSAFE Wireless Controller User Manual

Click the Apply button.

Your settings are saved.

Click the Back button.

The Managed AP List page displays. Changes that you made on the Edit Access Point 
page are displayed in the table.

If the changes do not display in the table, click the REFRESH button.

To restore a managed access point to its original firmware and use it once again as a 
standalone access point, remove the access point from the Managed AP List. Log in to the 
access point’s web management interface, upgrade the firmware to the standalone AP 
firmware version, and reboot the access point.



Open a web browser, and in the browser’s address field, type the wireless controller’s IP 
address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login window opens.

Antenna

You can specify which antenna the access point uses by making a selection from 
the menu:

Internal. The access point uses its internal antenna.

External. The access point uses its external antenna or antennas. External 
antennas are optional antennas that do not come standard with an access 
point.

Site

Shows whether you designated the access point as a local or remote one:

Local. The access point is designated as a local.

Remote. The access point is designated as remote.

For more information about designating an access point as local or remote, see 

Building

Select a building from the menu. By default, the building designation is 
Building-1.

For information about how to set up a custom building, see 

Floor

Select a floor from the menu. By default, the floor designation is Floor-1.

For information about how to set up a custom floor, see 

Location

Enter a name that is meaningful to you.